We often receive feedback from our customers regarding our products and customer service. We want to share some of that feedback with you.
At National Grating we take customer service seriously. We realize that our customers are busy, so we are here to answer the phone and help. Simple as that.
National Grating Customer Reviews
Here is the look of the progress right now from shore.
We are using existing piles and your structural components to stabilize them and tie it all together.
All fasteners are ½” Dia – 316 Stainless Steel, with Nylok Nuts. Lateral bracing is in 6” I beams, stringers are 8” H Beam facia is 8” C-Channel. Cross ties to piles in 12” C – Channel. Cross beams to piles with ¾” – 316 Stainless all thread with 316 Stainless Nylok nuts.
It is an incredible look and STRONG structure. I was amazed at how tightly it is holding everything together. A truly remarkable product that is making an amazing finished product.
If you want to come look, or want more information let me know.
Attached are some photos of the new grating National Grating supplied for the City of Onalaska Fire Bay Floor Repair project. Grating fit perfect and I really appreciated all the assistance from National Grating on the project. Also, fairly sure my wife will put the gift card to good use.
I bought some grating from you a couple months ago.
Just wanted to let you know I did receive your gift card, that was very thoughtful.
My project was delayed due to weather and vacations. But I did cut and install the grating today.
I’m sure it is an unusual application. I was rebuilding the deck that is on top of my house and needed material that could span the 43 inches across the peak without contacting it, there was only a couple of inches for clearance. The original deck design had supports that rested on top of the shingles which caused leakage.
Your fiberglass grating was the only solution I could find .
I’ll send a photo of the finished deck in a few weeks!
The product worked great and is 10 times better than the steel grates we had in the past. We will not be needing any more but will definitely share with our other locations.
Before the new FRP Stair Treads from National GratingBefore the new FRP Stair Treads from National Grating
Hi Dylan, Just wanted to send a note and thank you for the Tims card the crew appreciated it. I appreciate the customer support by you and Amy. Thanks Again
We greatly appreciated the hand-written card and gift card. We send hand-written thank you cards too and to see we’re not the only ones still practicing good ol’ thank-you cards certainly brings a smile to my face! 😊
The grating is working well for our application, with a few adjustments on our end as previously we had a solid platform so levelers on legs would go right through now.
Durability and sustainability is certainly there and so far we’re quite pleased with the product.
Quick thank you for the card and starbucks card. I will make sure to use it and buy the office a drink. Our customers do not allow pictures in their facilities or we would gladly send you pictures. We cut them down into brush handles to use for washing trucks. We need them stiff, chemical resistant, and light weight and this worked perfectly.
Our accounting team here is working on the credit application and setting up an account in our PO software. When this is completed, you should expect a PO for the grating.
Your team was very helpful and prompt with quoting.
Thanks
Ian
First Name: Ian
City: Campbell River
State / Province: British Columbia
Industry: Manufacturing
Bonjour capitaine,
Tel que discuté, voici l’information reçu de Maurice, il me dit que c’est un excellent produit, la capacité de charge est de 300lbs au pieds carré pour le 1 pouce d’épaisseur et de 900lbs au pieds carré pour le 1 1⁄2 pouce d’épaisseur. Vous connaissez mieux ça que moi alors dite moi si le 1 pouce est suffisant ou pas?
As discussed, here is the information received from Maurice, he tells me that it is an excellent product, the load capacity is 300lbs per square foot for the 1 inch thick and 900lbs per square foot for the 1 1⁄2 inch thick. You I know this better than I do, so tell me if the 1 inch is enough or not?
We don’t use a ton of FRP Grating but anytime we do you are the only people we call. This is all due to Chris and his positive attitude. He makes us feel important like we are your only customer and everytime I talk to him he goes above and beyond for us.
City: Savannah
State / Province: Georgia
Industry: Manufacturing
Hi Dylan,
We needed a quote to be able to evaluate the cost of a future project, we are good for now.
Your team handle my request in a professional manner and promptly, I can’t complain.
Thank you,
Jean-François
First Name: Jean-François
City: Gatineau
State / Province: Quebec
Industry: Pulp and Paper
Dylan,
The product is easy to cut and install. We should be complete by end of week with the FRP install. If I have
something else specified or have a need, I will contact you. Thank you for all your help, your team did a
great job.
Chris
First Name: Chris
City: Las Vegas
State / Province: Nevada
Industry: Construction
Dylan,
You and Cody were a pleasure to work with. The communication was great and I appreciate how you quickly fulfilled our order.
We just broke ground on another school project and plan on making another purchase late next year.
Have a nice holiday!
Thanks,
Matt
Dylan,
The grates worked out great for us. We are looking to purchase 76 more along with around 850 of the clips. Would you please work up a new invoice for us?
Please plan on shipping it to the same location. Let me know if you need additional information from me.
Thanks,
Matt
First Name: Matt
City: Chicago
State / Province: Illinois
Industry: Construction
Thank you so much Sarah,
You’ve made the ordering and transaction very easy and affordable for me and as a busy small business person I really appreciate that .
I’m excited to use this product and be able to offer it as an option to my clients .
Cheers
First Name: Joe
City: Cambridge
State / Province: Ontario
Industry: Boating
How long does it usually take to set up an account with your team? Your prices are very reasonable and quick to response, we love that here. Do you mind sending me the spec sheet for this material.
Thank you,
Daniel
First Name: Daniel
City: Huffman
State / Province: Texas
Industry: Construction
No worries. You guys are always my first choice. Thanks for all the hard work you put in, have a great weekend.
Patrick
First Name: Patrick
City: Marietta
State / Province: Georgia
National Grating Fiberglass Reinforced Plastic (FRP) Solutions:
https://nationalgrating.ca/wp-content/uploads/2024/04/Yellow-Modern-Construction-Presentation-1.jpg10801920Braden Taylorhttps://nationalgrating.ca/wp-content/uploads/2022/01/NG-Logo-JAN-2022-300x128.pngBraden Taylor2024-04-29 18:23:452024-09-18 15:55:49What are people saying about National Grating?
Rusty metal grating is unsafe and unsightly. At National Grating we believe FRP Grating is far superior!
At National Grating we believe Fiberglass Reinforced FRP Grating is far superior than steel grating.
For decades National Grating has been providing FRP Solutions in the form of Molded, Pultruded, Mini Mesh and High Load Capacity Grating and FRP Structural Shapes like C-Channel, I-Beams, Tubing and Stair Treads to customers across North America.
Our years of experience in this industry provide the in-depth technical knowledge required to select the FRP material that meets the needs of your project.
We are continually improving our line of fiberglass products with the latest innovations to provide our customers with the most cost-effective, high quality FRP solutions. We also take pride in superior technical support, giving you the information you need to confidently make the right choice.
Here is why we believe FRP Grating and FRP Solutions are far better than steel grating alternatives.
Strength:
Fiberglass grating offers comparable strength to steel but with added benefits like improved impact resistance and flexibility.
While comparable in strength, FRP grating is significantly lighter than steel, making it easier to install without heavy lifting equipment.
Corrosion Resistance:
FRP grating excels in corrosive environments as it does not rust or corrode like steel, making it ideal for use around chemicals or outdoor elements corrosive to steel.
Safety:
Fiberglass grating is non-conductive, providing safety benefits in electrically hazardous workplaces. It also offers slip resistance and is softer underfoot compared to steel, reducing worker fatigue.
Cost:
While the production cost of FRP grating is higher than steel, the long-term maintenance-free aspect of FRP can make it a more cost-effective choice over time. Steel grating requires ongoing maintenance and replacement costs.
Theseoutdoor entrance stairs were rusty and worn out looking. Newly installed FRP Stair Treads improved the first impressions for the business, and added safety for their clientele.
Long Life Span:
FRP does not rust or rot and does not degrade due to sun exposure, moisture and humidity, or extreme heat and cold.
Maintenance Free:
FRP grating requires little-to-no maintenance costs post-installation, unlike steel grating that may need regular maintenance.
FRP Grating has optional colors that are added during the molding process which instills the entire product with a consistent color that does not wear out or rub off. Unlike steel grating that is painted that can wear off over time requiring maintenance.
The advantages of FRP grating over steel include its strength, lightweight nature, corrosion resistance, non-conductivity, safety features, and cost-effectiveness in the long run.
National Grating Customer Service
National Grating prides itself on providing exceptional customer service to all customers, big and small.
High Load Capacity FRP Grating was used in this car wash facility to upgrade the metal grating that was bent and worn out due to heavy vehicle traffic.
National Grating Fiberglass Reinforced Plastic (FRP) Grating Solutions:
Here yellow Molded FRP Grating was used to cover a drainage trough for water reclamation.
Fiberglass FRP Grating is the perfect solution for Car Wash and Vehicle Maintenance facilities like mechanics and oil changers.
National Grating is a leading supplier of FRP solutions for car wash and vehicle maintenance facilities across North America.
FRP Grating uses in Car Wash facilities
Fiberglass FRP Solutions are used in Car Wash facilities primarily as grating for water drainage and in Mechanics for Oils, coolant, and other liquid drainage. The molded or pultruded FRP grating is often used to span a drainage ditch to allow liquids to flow into a drainage system while providing a strong and safe surface for vehicles and customers. For heavy loads High Load Capacity (HLC) or Heavy-Duty FRP Grating is used that can support vehicle weights.
Other FRP applications in vehicle maintenance facilities include grating for walkways, FRP Stair Treads for nonslip stairs, FRP plate for a solid nonslip surface on platforms or walking surfaces and FRP Railing for noncorrosive hand railings.
Wash Bays
Troughs
Drainage Systems
Trenches
Walkways
Grating
Platforms
Nonslip stairs
Railing
Mini Mesh FRP Grating was used here to allow water and cleaning agents to drain through the entire floor while creating a safe walking area.
FRP grating is utilized in car washes for its drainage capabilities, safety features, aesthetic appeal, ease of maintenance, and chemical resistance, making it a versatile and practical solution for flooring and drainage needs in these facilities.
Engineered to carry heavy traffic like cars, trucks & forklifts.
Heavy Duty HLC (High Load Capacity) FRP grating is used in car washes due to its strength, durability, corrosion resistance, low maintenance requirements, safety features, and ease of installation, making it an ideal choice for areas with heavy vehicle traffic like those found in car wash facilities.
Heavy Duty or High Load Capacity FRP Grating is used to cover areas with heavy traffic. It’s engineered to carry heavy traffic like trucks and forklifts.
FRP stair treads are utilized in car washes for their non-slip properties, corrosion resistance, durability, and ease of maintenance, making them a practical and safe choice for stairs within these facilities.
FRP plates are utilized in car washes due to their corrosion resistance, durability, ease of maintenance, and safety features, making them a suitable choice for various applications within these facilities.
Why FRP Grating is perfect for Car Washes:
Durability: FRP grating is commonly used in car wash drains due to its corrosion resistance, durability, and ability to handle heavy traffic and exposure to water and chemicals without deteriorating or requiring frequent replacements.
FRP Plate is a solid sheet of fiberglass reinforced plastic with an nonslip top walking surface.
Corrosion Resistance: FRP materials are resistant to corrosion from water and cleaning chemicals commonly used in car wash operations, ensuring longevity even in harsh environments.
Chemical Resistant: FRP grating is resistant to chemicals commonly used in car wash operations, making it a suitable choice for areas exposed to cleaning agents and detergents without deteriorating or losing its structural integrity.
Non-slip: The non-slip properties of FRP grating make it a safe flooring option for car wash facilities, providing traction even when wet and reducing the risk of slips and falls for both customers and staff.
Strength and Durability: HLC grating is engineered to withstand heavy vehicle traffic, including forklifts and large trucks, making it ideal for areas with high loads like car wash facilities. It is extremely durable and can handle corrosive environments without rusting, ensuring a long-lasting solution.
Grey Mini mesh FRP Grating was used in this off road vehicle cleaning bay because it is strong enough to carry the vehicles weight while also allowing water and soap to drain through.
Safety and Performance: The high strength-to-weight ratio of HLC grating makes it easy to handle and install, providing a safe and stable flooring solution for car wash areas with heavy traffic. Its non-conductive properties also enhance safety in these environments.
Easy Maintenance: FRP Grating is easy to clean and maintain, requiring minimal effort to keep it looking new and ensuring a hygienic environment.
FRP grating is utilized in car washes for its drainage capabilities, safety features, aesthetic appeal, ease of maintenance, and chemical resistance, making it a versatile and practical solution for flooring and drainage needs in these facilities.
National Grating Fiberglass Reinforced Plastic (FRP) Grating Solutions:
https://nationalgrating.ca/wp-content/uploads/2024/03/carwash-colorful-grating-1.png533800Braden Taylorhttps://nationalgrating.ca/wp-content/uploads/2022/01/NG-Logo-JAN-2022-300x128.pngBraden Taylor2024-03-05 17:04:502024-03-05 17:58:08Fiberglass FRP Grating for Car Washes and Vehicle Maintenance Facilities
Before: These unsightly metal stairs needed improvement. FRP Stair Tread Covers were the perfect solution!
Fiberglass FRP Stair Tread Covers easily install over existing metal, wood or concrete stairs to instantly improve safety, usability, visibility, and aesthetics.
National Grating recently assisted a small business in Ontario to revitalize their old steps with Fiberglass FRP Stair Tread Covers. The outdoor staircase provides access to the Yoga Studio on the second level of the building. The old stairs were rusting and becoming unsightly and hazardous. Fiberglass FRP Stair Tread Covers were easily installed over the existing metal stairs.
Entrances are the first impression for customers approaching your business. The unsightly stairs leading to the Yoga Studio not only provide access to clients, but they are also the first thing people see before they enter the business and the last thing they see when they leave. The rusting, old stairs looked terrible and presented a bad first impression for clients. The Yoga Studio decided it was time for an update! New National Grating FRP Stair Treads cover up old stairs without need for a new rebuild, while providing added safety through bright yellow nosing and a grippy anti slip coating.
New FRP Stair Treads cover up old unsightly stairs without need for a new rebuild, while providing added safety through bright yellow nosing and a grippy anti slip coating.
People use FRP (fiberglass reinforced plastic) stair tread covers for several reasons, including safety, durability, and ease of installation. FRP stair tread covers are known for their non-slip properties, which enhance safety on stairs. They are lightweight, making them easy to install, and fiberglass-reinforced plastic is durable and resistant to corrosion, making it a suitable material for enhancing stair safety.
Before: Outdoor Metal Grating staircases rust and corrode. FRP Plate is another perfect solution to cover up unsightly metal with a grippy top.
Fiberglass FRP Stair tread covers from National Grating have been widely installed over metal, wooden, and concrete stairs with ease.
FRP Stair Tread Cover Benefits
The benefits of using FRP (fiberglass reinforced plastic) stair tread covers over traditional materials include:
Safety: FRP stair tread covers are known for their non-slip properties, which enhance safety on stairs.
Durability: Fiberglass-reinforced plastic is durable and resistant to corrosion, making it a suitable material for enhancing industrial stair safety.
Ease of Installation: FRP stair tread covers are lightweight, making them easy to install.
Versatility: They can be used on various surfaces such as step ladders, concrete, wood, and metal stairwells.
Cost-Effectiveness: They can cover worn-out or outdated steps, saving money by avoiding the need for expensive rebuilds.
Fiberglass FRP Stair Tread Covers create a beautiful finished product.
Overall, the use of FRP stair tread covers offers advantages in terms of safety, durability, ease of installation, versatility, and cost-effectiveness compared to traditional materials.
FRP Stair Tread Cover Applications
FRP (fiberglass reinforced plastic) stair tread covers have various applications due to their beneficial properties. Some of the common applications include:
Interior and Exterior Use: FRP stair tread covers are suitable for both interior and exterior applications, making them versatile for use in different settings.
Industrial Settings: They are used in industrial settings to enhance safety on stairs, walkways, and platforms, especially in heavy traffic areas where anti-slip surfaces are essential.
Outdoor Walkways: FRP stair tread covers are ideal for outdoor walkways due to their anti-slip surfaces, providing an important safety feature in areas with heavy foot traffic.
Various Substrates: They can be used on a variety of substrates such as concrete, wood, stone, metal, and brick stairs, making them suitable for different types of stairwells.
Safety Enhancement: These covers are designed to reduce accidents caused by slips and falls, making them a practical and affordable solution for protecting steps.
Fiberglass FRP Stair Tread Covers are attractive and functional.
FRP stair tread covers are widely used in industrial, outdoor, and indoor settings to improve safety, protect steps, and provide anti-slip surfaces on various substrates.
How to Install FRP Stair Tread Covers
To install FRP (fiberglass reinforced plastic) stair tread covers over metal stairs, the following general steps can be followed:
Contact National Grating to speak with an experienced individual to help you make the best decision.
Measure: Take measurements of the stair treads so the National Grating fabrication team can size your stair tread covers for a perfect fit. Assess how many stair tread covers you require.
Preparation: Ensure that the metal stairs are clean, dry, and free from any debris or protrusions that could affect the installation.
Attachment: Use stainless steel or zinc plated saddle clips and domed or flat head bolts suitable in length for the depth of the FRP tread covers. Pre-drill the FRP to the proper hole size for the screws being used.
Installation: Pre-position the FRP covers in place to ensure the fit, then install screws about 6 inches from the ends of the piece, and additional screws every 2 feet as needed.
A large washer with a nut and bolt is used here to securely hold the FRP Stair Tread to the existing metal step.
Once installed, ensure that the covers are securely and firmly attached and provide a non-slip surface for safe use before opening to the public.
Above the stair treads a flat head bolt is used to create a flat walking surface.
Other Fiberglass FRP Stair Options from National Grating
Fiberglass FRP Stair Treads
Fiberglass FRP Stair Treads are made from molded FRP with a heavy duty nosing section that can be marked yellow for added safety. The grated design is perfect for outdoor application as water, ice and snow simply falls through for no buildup or maintenance
National Grating also has full FRP Molded Stair Treads for situations when the existing stair needs to be replaced or for new staircase construction.
Fiberglass stairs are the best solution for outdoor anti-slip stairs. They outlast traditional building materials and are easy to install. Stair treads made of FRP grating are lightweight, easy to fabricate, and highly durable.
Fiberglass stair treads are available as molded FRP treads with yellow nosings and a gritted top surface for all weather grip, for the ultimate in safety. Non-slip stair treads are corrosion resistant and lightweight.
Fiberglass stairs can be fabricated from fiberglass grating, which opens up the options enormously for color, resin, grit, mesh size, and whether molded fiberglass grating or pultruded FRP grating is more suitable.
Fiberglass FRP Railing
Fiberglass Railing Systems are a natural accompaniment to fiberglass stairs for corrosive environments – all components will outlast and outperform steel, stainless steel, wood, or other traditional materials.
FRP railing is non-conductive and in cold environments does not become cold to the touch like metal.
Fiberglass FRPPlate
FRP Plate can be easily fitted over old metal or steel stairs and walkways to provide a solid, grippy surface.
Fiberglass Plate is a large sheet of FRP that comes in a variety of colors with an anti slip, grippy coating. FRP plate is perfect to cover unsightly landings and platforms with a solid anti slip surface.
FRP Platecomes in thicknesses ranging from 1/8″ to 3/4″ and various resin systems. Plate can be installed on fiberglass grating, metal or concrete, for heavy loads and complete flooring system with all the benefits of fiberglass reinforced panels.
National Grating Customer Service
National Grating prides itself on providing exceptional customer service to all customers, big and small.
All National Grating facilities are equipped for large scale shipments of FRP Composite products directly to your location.
National Grating (www.NationalGrating.com) a leading North American provider of FRP Grating and FRP (Fiberglass Reinforced Plastic) Composite Structural solutions, is proud to announce an eastern facility expansion to a new location in Woodstock, Ontario, Canada. This strategic expansion is in response to the growing demand for FRP products and the company’s commitment to providing exceptional service to its customers.
“We have expanded our Ontario operations by moving to a new two-acre facility just 10 mins from Highway 401 with 5,000+ pieces of Fiberglass FRP Grating, Shapes, Beams and Structure in stock.” Dylan Powell, Sales Manager. “This Eastern Distribution facility will help us to service our customers up and down Eastern North America. We work hard to commoditize FRP and make it accessible and available to the consumer!”
“We will maintain our Western branches in Vancouver and Kelowna in British Columbia and Spruce Grove in Alberta in addition to our dozen stocking locations across the USA. We have always prided ourselves in having the best customer service in the industry and this expansion is to ensure that continues.” Rick Van Rikxoort, National Grating President.
The new facility boasts a large inventory of FRP products, including bulk FRP molded and pultruded grating, as well as a wide range of specialty items such as FRP Stair Tread, Fiberglass Plate, Fiberglass Railing, Fiberglass Tubing, Fiberglass Beams, Fiberglass C-Channel, Fiberglass I-Beams, Fiberglass H-Beams and FRP Threaded Rod and Nuts. With this extensive inventory, National Grating is well-positioned to serve the needs of metal fabricators, contractors, and construction companies in Ontario and beyond. The company’s ability to ship quickly for projects, coupled with its custom fabrication services, makes it a valuable partner for businesses seeking durable and versatile FRP solutions.
“Feel free to drop by our newest location to view thousands of FRP Grates and Shapes in stock!” Dylan Powell, Sales Director “Pickup a sample when you go! We have tons of inventory to look at and tons of samples to take back to your office to show your staff the quality that goes into our products.
The Ontario facility will offer a complete line of FRP solutions for various applications, including walkways and platform grating, railings, and stair treads with a non-slip AODA, ADA compliant finish. In addition, National Grating’s FRP products are known for their corrosion resistance, significant weight savings, and ease of installation, making them an ideal alternative to traditional materials.
National Grating’s new Eastern Distribution Center represents a significant step forward in furthering the company’s commitment to service and quality and strengthening the company’s ability to serve its valued customers across North America. With its extensive inventory and superior logistics network, the company is well-equipped to provide fast delivery of fiberglass grating all major cities in Eastern Canada and the USA.
“National Grating has experienced huge growth over the past several years. We saw a need for an Eastern distribution hub to better serve our customers in the area. The massive amount of metal fabricators and contractors that have been switching over to our FRP Grating products has really been the impetus for his new location and we look forward to providing them with exceptional service.” Dylan Powell, National Grating Sales Director.
“We pride ourselves on providing the absolute best customer service in the industry with dedicated sales support, fast shipping and a great product. Give us a call and talk to a real person about your projects FRP needs.” Rick van Rikxoort, National Grating President.
National Grating Ontario FRP Solutions and Services
Customers often require sheets of molded or pultruded FRP Grating to be cut to size for installation.
Bulk Inventory
National Grating specializes in having high levels of inventory on hand. This allows customers to view the product at our facility while also allowing us to quickly send samples and products to your office, factory or construction site.
Custom Fabrication Services
Our FRP experts are highly experienced in providing custom solutions to a variety of applications. Whether requirements call for grating cut to specific lengths, widths or sizes, our fabrication department has the experience to accommodate a variety of requests. Custom services are offered by the new National Grating Ontario location with an in-house fabrication shop and experienced professionals who work closely with clients to turn their design concepts into high-quality finished products.
National Grating fabrication services involve the use of advanced fabrication techniques and technical expertise to produce custom FRP structures, grating, platforms, handrails, beams, and other products. Custom FRP fabrication services provide corrosion-resistant, durable, and customized solutions that meet specific design and functional requirements.
On-site Training and Education
We are FRP experts with years of experience that we want to share. If you are interested in booking one of our local FRP experts to educate you and your team on FRP applications, uses and advantages please contact us at: 1-844-599-0260 or sales@nationalgrating.com
National Grating specializes in having large quantities of FRP solutions in stock and ready to ship.
National Grating Fiberglass Reinforced Plastic (FRP) Grating Solutions in Ontario:
Just outside Woodstock across from the Oxford Drive In – minutes from the 401 – 1.5 Hours from Toronto and ~ 2 hours from Detroit or Buffalo crossings.
About National Grating – FRP Solutions
National Grating is a North American provider of FRP Grating and Structural solutions. The company offers a wide range of FRP products and fast delivery via its superior logistics network. With a focus on quality, durability, and customer satisfaction, National Grating is a trusted partner for businesses across North America. For more information about National Grating and its FRP products, visit nationalgrating.com.
As the fall and winter seasons approach, many are gearing up to face the challenges that come with cold, wet, icy and slippery conditions. FRP Grating and Structural products are ideal for cold weather and arctic installations as they have very low thermal conductivity and do not become brittle in the extreme cold faced by many across North America.
One of the most significant advantages of FRP grating, stair treads and stair tread covers in winter is their exceptional slip resistance. FRP surfaces are engineered to provide reliable traction, even when wet or covered in snow and ice. This can prevent accidents and ensure safe movement on stairs and walkways, both indoors and outdoors.
Slips trips and falls are the #1 cause of workplace injuries.
Choose FRP Grating for a safe workspace!
Consider FRP Grating, Stair Treads, and Railings for the following Benefits/Advantages:
One of the most significant advantages of FRP grating, stair treads, and handrails in winter is their exceptional slip resistance. FRP surfaces are engineered to provide reliable traction, even when wet or covered in snow and ice. This can prevent accidents and ensure safe movement on stairs and walkways, both indoors and outdoors.
Winter weather often means exposure to salt and de-icing chemicals, which can be corrosive to traditional materials like steel. FRP is highly resistant to corrosion, making it an ideal choice for outdoor installations, such as walkways and handrails. Its durability ensures that these elements remain safe and functional throughout the winter season.
FRP Stair treads with yellow nosing and grit top are the ultimate in winter safety!
FRP has a low thermal conductivity, which means it does not readily transfer heat or cold. In winter, this can be a significant advantage. Handrails made of FRP won’t become uncomfortably cold to the touch, providing a more pleasant experience for those who need to hold onto them in chilly weather.
FRP products require minimal maintenance. They do not rust, warp, or rot, and they’re highly resistant to the effects of freezing and thawing. This translates to cost savings and less time spent on upkeep during the winter season.
FRP materials are built to last. They can withstand the harsh conditions of winter without deteriorating. This long-term durability ensures that your infrastructure investments remain sound and reliable year after year.
FRP products are lightweight and easy to install, which can save time and resources, especially during winter when weather-related challenges can increase project complexities.
Embracing FRP grating, stair treads, and handrails during the winter season is a smart choice for safety, reliability, and longevity. These versatile materials offer a range of benefits that can help ensure that your infrastructure remains secure and functional, regardless of the weather conditions. Whether it’s in industrial settings, commercial properties, or residential areas, the advantages of FRP are undeniable during the challenging winter months.
National Grating FRP Products Designed for Winter Applications
Large openings in grating allow snow and ice to pass through
Fiberglass stair tread covers are excellent for use in heavy traffic areas, such as outdoor walkways. The anti-slip surfaces of these FRP stair tread covers are an important safety feature in walkways where moisture is present.
FRP Stair Tread Covers are molded, non-slip and gritted, with a yellow nosing for the ultimate in non-slip, high visibility surface. They are the ideal solution for outdoor and slippery all-weather applications, featuring high corrosion resistance, durable grit, and easy installation.
FRP Stair tread covers can be installed over wood, concrete or metal steps and are manufactured with a quartz grit-top surface and a standard nosing of highly visible yellow.
Fiberglass stairs are the best solution for outdoor anti-slip stairs. Stair treads made of FRP grating are lightweight, easy to fabricate, and highly durable.
Fiberglass stair treads are available as molded FRP treads with yellow nosing’s and a gritted surface, for the ultimate safety in wet or icy slippery conditions.
Optional gritted anti-slip top surface promotes safety while the large open area of the grating allows for water, snow and ice to simply pass through the material.
FRP Grating with anti-slip Quartz grit top coating provides great grip in slippery conditions
Fiberglass plate is light in weight and is easy to install, and at the same time is durable and sturdy. Pultruded Fiberglass Plate is industrial anti-slip flooring that is corrosion resistant and outlasts traditional building materials like steel and even stainless-steel plate. Most safety flooring applications will benefit from using Fiberglass Plate, and the different types of grit (smooth, fine, diamond) can give slip resistance in a wide variety of slippery situations.
The ultimate safe walking surface for walkways, docks with an optional gritted anti-slip top surface that promotes safety while the large open area of the grating allows for water, snow and ice to simply pass through the material.
Heavy Duty Grating is used to covers areas with heavy traffic.
Our High Load Capacity (HLC) molded grating is heavy duty, corrosion-resistant and low-maintenance. It’s engineered to carry heavy traffic like trucks and forklifts. HLC grating has many advantages over steel grating for performance and cost effectiveness. With a much higher strength-to-weight ratio, molded HLC fiberglass grating has optional top grit to provide extra grip in slippery outdoor applications.
FRP Railings have a high strength to weight ratio allowing for easy install and a safe work space
Fiberglass Railing, Handrail and Ladder Systems are a long-lasting, low-maintenance solution for harsh outdoor environments. FRP railing systems provide inherent corrosion resistance, low thermal conductivity and they are easy to fabricate and install. The installed cost is much lower than steel, and because of the long life and low maintenance life cycle, the costs of fiberglass railing are significantly lower than traditional materials over their lifetime.
When designing structures that use FRP grating and shapes, you can create accurate and complete CAD drawings more quickly by using our standard CAD blocks.
Saving Time With Better Results
Use these FRP CAD blocks for repeatable and accurate geometries that save you time and represent fiberglass grating components precisely in your plans.
Represent FRP Structures Accurately
Our collection of CAD blocks include the most frequently used dimensions and patterns of fiberglass grating, attachment systems and fasteners. Use the complete set of blocks together for best results.
Cleaner and Leaner CAD Files
Proper use of these blocks will keep your design file size optimized. Use the pre-designed CAD block for each dimensional value of grating and structural components rather than having to create and modify your own.
Save Time in the Field
Using standardized CAD blocks will promote consistency in project drawings, and prevent non-standard use or vague dimensions from becoming embedded in your plans. Avoid the unhappy moments on the job site when it turns out that one component of the build has not been accurately documented.
Proper use of blocks also mean that you can track the number of pieces required with more certainty.
When it comes time to put your plans into action, you can be assured that the FRP grating products that are stocked in National Grating distribution centers across the USA and Canada will match up exactly with your design.
Request the Standard FRP Grating CAD Blocks Now Available From National Grating
We are happy to share our standard set of FRP Grating CAD blocks with you, at no charge. Simply enter your contact information below and we will send them to you with no obligation.
https://nationalgrating.ca/wp-content/uploads/2020/03/CAD-blocks-for-FRP-Grating-Molded-Pultruded-Structural-AutoCad-Design-standard.jpg28805120alph@b3thttps://nationalgrating.ca/wp-content/uploads/2022/01/NG-Logo-JAN-2022-300x128.pngalph@b3t2020-05-28 14:58:072020-05-28 15:00:28CAD Blocks for FRP Grating and Structures
https://nationalgrating.ca/wp-content/uploads/2018/08/STEEL-TARIFFS-AND-THE-FRP-OPPORTUNITY.jpg13241768alph@b3thttps://nationalgrating.ca/wp-content/uploads/2022/01/NG-Logo-JAN-2022-300x128.pngalph@b3t2018-08-28 00:41:172018-09-12 19:52:53Steel Tariffs Create Uncertainty and FRP on the Rise
https://nationalgrating.ca/wp-content/uploads/2017/10/dangerous-warped-sharp-open-area-rusty-steel-grating.jpg11661920alph@b3thttps://nationalgrating.ca/wp-content/uploads/2022/01/NG-Logo-JAN-2022-300x128.pngalph@b3t2017-10-17 17:23:232022-03-13 05:25:51Alternatives to Steel Grating - New or Replacement
